Werbung
How to unfold your Smartgyro scooter
1. Unfold the handlebar mast and
adjust it. Then unfold the kickstand to
support the scooter.
Double secure folding system
3. Install six screws (two on each
side) with the included hex wrench.
How to turn on the lights of your
Smartgyro K2 PRO:
1. To turn the skate lights on and off,
you need to press the power button
twice.
2. You can also turn the lights on and
off through the APP.
2. Firmly connect the wires inside the
handle and mast. Slide the mango on
the stem. Be aware of the correct
orientation.
Headlight
toward front
4. Check that your scooter can be
turned on and off.
When assembling the handlebar on
the mast, remember to first fix the
structure with the screws WITHOUT
TIGHTENING THEM HARD and once they
are all correctly positioned and fitted
into the structure (looking for the
correct position), TIGHTEN THEM HARD
to assemble the handlebar correctly.
EN
11
Werbung
