Clever Clean Fusion MX 12 Gebrauchsanleitung Seite 14

EMPTYING THE DUST CONTAINER
• Empty the dust container only when the unit is switched off.
• Press the release button on the top of the dust container to open the dust container flap.
• Empty the dust container directly above an open waste bin. The distance to the bin should be as
small as possible so that the dust is not distributed in the environment.
• Close the flap again until you hear it click into place.
26
Item Number : 3929 / 3932
HEPA FILTER CLEANING / REPLACEMENT
• Clean / replace the HEPA filter only when the unit is switched off.
• Cyclone filters and HEPA filters are not suitable for washing machines, dishwashers or dryers.
• Before cleaning/replacing the HEPA filter, please empty the dust container (see chapter Emptying the
dust container).
• Remove any accessories from the suction opening of the main unit.
• Press the release button on the top of the main unit and then turn off the dust container.
• Then pull the dust container forward from the main unit.
• Cyclone and HEPA filters can now be pulled out of the dust container by grasping the two round
openings on the Hepa filter with two fingers.
• The Hepa filter can then be separated from the cyclone filter by turning it.
• The cyclone filter can be cleaned with a damp cloth.
• The HEPA filter must NOT be cleaned with water. Knock out the HEPA filter or clean it carefully with a
soft brush.
• The assembly is carried out in reverse order.
27