Seca 644 1321 108 Bedienungsanleitung Und Garantieerklärung Seite 88

5. OPERATION
5.1 Setting up the scale
Moving the scale
Aligning the scale
88 •
CAUTION!
Bodily injury
Perform a function check as described in the
section entitled "Function check" on page 109
before using the device each time.
1. Tilt the device until it can move freely on the
casters.
2. Keep the device in this position and move it to the
desired set-up or storage location.
ATTENTION!
Incorrect measurement due to force shunts
If the scale and housing is in contact with some-
thing, e.g. a towel, weight will not be measured
correctly.
►
Set the scale up so that only its foot screws
are in contact with the floor.
1. Place the scale on firm, level surface.