Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
l Never switch the torque adjustment or the gear change while the drill is working, as this will most likely
cause a damaged device. Wait until the device has completeley powered down.
Attention: Never use the tool with a plugged-in charger.
5. SECURITY TIPS
There are some basic security arrangements while working with electrical tools, e.g. to avoid fire; electric shocks and
injuries. Read the instructions, before you use this product and preservce the instructions for later consulting.
l personal security
Never wear too long clothes or jewelery while working, because this could be entangled in moving parts. If
you have long hair you should wear a hat / hairnet. Wear safety goggles (normal glasses are not safe) and
ear protectors. At a high level of dust loading, you should use a breathing mask.
l consider environmental influences
Don't use electrical tools in the rain. Don't use electrical tools at wet areas. Work with a good lighting.
Attention: Never use this electrical tool in near of flammable liquids and gases.
l correctly useing of this tool
Never use tools for things, they aren't made for. You get the optimal power of the tool, if you don't push too
hard on the machine.
l protect against electric shock
Avoid touching earthed things (e.g. pipes, heatings, fridges or cookers). Don't touch things consisting
metals, if you use the drill on walls.
l operation can not be performed by children and young people under 16 and people with intellectual
disabilities
Kids and people with intellectual disabilities shouldn't have access to machines or power cables. Keep
them away from your workplace.
6. SERVICING
Under normal conditions the drills requires no servicing. At a very often usage or through incorrect electrical
loading, it could lead to an incorrect function of the battery. In this case, the battery should be exchanged as
soon as possible.
Please check before charging the integrity of the cable to the battery charger and power plug. In case of
doubt, the operation is not permitted.
7. GUARANTEE REGULATIONS
For all manufacturing and material defects, the statutory warranty applies. In these cases we take the replacement
or repair of the product. Shipping costs shall be borne by our company, except as required by law. Please report
the warranty on our service platform http://www.profi-pumpe.de/service.php. We will inform you how to proceed with
case-related. Returns please sufficient postage. Unfortunately not prepaid returns can not be accepted because they
are filtered out before delivery. Our service we provide in Germany.
The warranty does not cover:
l material wear (e.g. battery, chuck, bits)
l unjustified interventions or changes in the drill
l damages by self-faults
l improper servicing and improper use
Moreover, we can't give damage compensations for secondary damages!
8. ANALYZING AND FIXING OF MISTAKES
Problem
Drill is working, but very slowly and
without power
Bit in chuck is shaking or sliding
back when you drill
The "drill-button" can't be pushed
IMPORTANT!
Possible cause
Battery not fully loaded, the battery
may be defect
Bit not hard enough in chuck or not
straight in chuck
The dip-switch is in neutral position
English 3
Solution
Charge the battery again or ex-
change it
Put the bit straight in the chuck
again
Check the forward or backward
dip-switch
Werbung
Inhaltsverzeichnis
