Connecting The Power Supply - Conrad XCA 200 Bedienungsanleitung

Good places for installation are the luggage boot and the free space under the seats. Make sure that the
amplifier can be accessed in such a way that it can be connected to the electrical system.
A favourite place of installation is also the bulkhead between the luggage boot and the pas-
senger compartment.
• Mark the holes for the screws at the place of installation. For doing this, use the device as a pattern.
• Drill the holes for the fastening screws.
• Fasten the amplifier by the two screws delivered.

Connecting the Power Supply

The electric connection should always be performed by a specialist.
To avoid short circuits and resulting damages to the de vice the negative terminal
(ground) of the car battery is to be disconnected first.
Before reconnecting the negative terminal to the battery, ensure that the amplifier
has been completely connected.
29