Startup; Mechanical Installation - Conrad XCA 200 Bedienungsanleitung

Setup
To ensure the correct initial operation, please read these operating instructions
and the safety instructions carefully before using the appliance!

Mechanical Installation

Modifications to the vehicle which are made necessary through the installation of
the amplifier or other components must always be carried out in such a manner
that neither the traffic safety nor the designed stability of the car is impaired. For
many cars, the operating license lapses already if you saw out a part of metal.
If you are in doubt when selecting a place for installation, consult your car dealer.
Since the amplifier generates heat the place of installation must be resistant
against heat.
To ensure an adequate ventilation, there must be an open area of 5 cm around the
housing. Apart from this, the air circulation may not be obstructed by objects such
as magazines, blankets, covers or similar.
Before drilling the attachment holes make sure that the electric cables, brake lines,
the fuel tank or similar systems will not be damaged.
If using tools to install your car hi-fi components, observe the manufacturer's safe-
ty instructions.
When installing the car hi-fi system, consider the danger of accident which can
arise by devices broken away in the case of an accident. Therefore, fasten each
part reliably and at a place at which it cannot become a risk for the passengers.
Select a suitable position for mounting the amplifier.
A suitable place for mounting has the following features:
• dry
• as free from dust as possible
• little vibration
• good circulation
• heat-resistant environment
28