Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Care & Maintenance
Cleaning the HEPA Filter Assembly
1. Place the vacuum securely on a flat surface, then turn the HEPA filter assembly cover in the
direction indicated and remove the HEPA filter assembly.
Note: Remove the built-in foam pad before cleaning the HEPA filter assembly. Rinse the HEPA
filter and foam pad with water.
2
2
2. Rinse the HEPA filter and foam pad with water. To thoroughly remove all dust caught in
the filter, rotate the HEPA filter by 360 degrees while rinsing. Lightly tap the filter against a
sink several times to remove any excess debris.Keep the HEPA filter in a well-ventilated
and cool place to fully dry.
Note: Fully dry the filter (at least 24 hours) before reinstalling it.
13
1
1
3
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6
Care & Maintenance
Cleaning the Soft Roller Nozzle、Mini-Motorized Nozzle
and Carpet Roller.
Note: To prevent injury from accidentally turning on the vacuum, make sure the Soft Roller
Nozzle、 Mini-Motorized Nozzle and Carpet Roller is detached from the vacuum before
removing the head.The Soft Roller Nozzle、 Mini-Motorized Nozzle and Carpet Roller
contain electrical components, and the Soft Roller Nozzle head also contains bearings. Do
not wash these parts with water. Be careful of sharp objects when removing debris caught
in the heads of Soft Roller Nozzle、 Mini-Motorized Nozzle.
Cleaning the Soft Roller Nozzle
1. Push the brushbar head release button in the direction of the arrow until the cover of the
brushbar head pops to open, then remove the brushbar head by lifting it in the direction
indicated.
2. After you have finished cleaning the Soft Roller Nozzle , reinstall it by following the
disassembly steps in reverse.
14
Werbung
