Bluetooth Connection; Declaration Of Conformity - Conrad 37 27 38 Bedienungsanleitung

Bluetooth connection

To transfer the stored GPS position data to other Bluetooth devices, these devices must be
coupled with the GPS logger.
• Switch the GPS logger and the Bluetooth device to be coupled with.
• On the Bluetooth device to be coupled, start the search for other Bluetooth devices.
• If you are asked to enter the Bluetooth password, enter "0000".
• As soon as the Bluetooth connection has been found, the GPS position data from the GPS
logger are transferred to the coupled Bluetooth device at regular intervals.
• During each data transfer, the Bluetooth status LED (2) fl ashes briefl y.
The coupling process to other Bluetooth devices can differ from the description
above. Always refer to the instructions for the Bluetooth device to be coupled on this
point.
Installation of the software and the USB driver
• Place the software CD in the CD drive of your computer.
• Run the fi le named "CanWay Installer.exe" and follow the instructions on the screen.
• After a successful installation, plug the provided USB connection cable into the USB port (4).
• Connect the other end of the USB connection cable to a free USB port on your computer.
• Switch on the GPS logger. The device is recognized.
• Now start the software application.
After a successful installation, an extensive description of how to use the software
can be found in the installation directory.
Problem during GPS reception
The environmental conditions listed below can lead to a poor GPS reception and thus to incor-
rect position determinations. Try to avoid such conditions during operation.
• Operation inside tunnels or buildings (especially in reinforced concrete structures or with
windows with metallised insulation coating.
• Operation in vehicles behind sun visor strips or window heaters.
• Operation near electronic devices (especially in the case of devices with radio transmitters).
• Operation near strong electric motors or transformers.
• Operation near tall buildings.
• Operation in thick forests.
Maintenance and care
• You do not need to service the product, apart from an occasional cleaning.
• Use only a clean, dry cloth for cleaning.
• Never use abrasive or chemical cleansers that can damage the housing.
Disposal
a) Product
Electronic devices are recyclable waste materials and must not be disposed of in the
household waste!
Dispose of an unserviceable product in accordance with the relevant statutory regu-
lations.
Remove the rechargeable battery inserted and dispose of it separately from the
product.
b) Rechargeable battery
As the end user, you are required by law (Battery Regulation) to return used batteries and
rechargeable batteries. Do not dispose of used batteries in the household waste!
Batteries/rechargeable batteries contain harmful materials and are labelled with
the symbol shown to indicate that disposal in the household waste is forbidden.
The symbols of the relevant heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead
(marking can be seen on the battery/rechargeable battery, e.g. underneath the
refuse bin symbol shown on the left).
You can return your used batteries/rechargeable batteries free of charge at the offi cial col-
lection points of your community, in our stores, or at places where batteries or rechargeable
batteries are sold!
You thereby fulfi l your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage .................................3.7 V/DC (GPS logger)
Car charger ...........................................Input voltage 12-24 V/DC
Rechargeable battery ...........................Li-ion battery, 3.7 V/1000 mAh
Operating temperature range ...............-20 °C to +60 °C
Dimensions of GPS logger ................... 74 x 44 x 22 mm
Weight of GPS logger ...........................approx. 60 g

Declaration of Conformity

The manufacturer hereby declares that this product conforms to the fundamental requirements
and the other relevant regulations of Directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www.conrad.com.
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
Output voltage 5 V/DC
Output current 1000 mA