Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.1 Bedienelemente der Maschine
1.1.1 Die Front- und Rückseite der Schweißmaschine
1.
Negative (-) welding power output connection socket.
2.
MIG Torch Polarity Change Power Connection.
3.
Remote connection plug.
4.
TIG torch gas connector.
5.
Positive (+) welding power output connection socket.
6.
MIG torch euro connector.
7.
Water outlet (blue).*
8.
Intake: From here, water or coolant, antifreeze, etc. can be injected into tank.
9.
Backwater inlet (red).*
10.
Water level calibration.*
11.
Power switch.
12.
Gas inlet connector.
13.
Input power cable.
5
Werbung
