Operation; Switching The Product On/Off; Enabling/Disabling The Automatic Power-Off Function; Turning The Backlight On Or Off - Parkside PWM B2 Bedienungs- Und Sicherheitshinweise

˜ Operation
˜ Switching the product on/off
Switching on: Press
[ 4 ]
backlight for approx.1 second before entering measurement mode.
In measurement mode, the display shows the current wind speed and
temperature (Fig. C).
Switching off: Press
4 ] [
˜ Enabling/disabling the automatic power-off
function
When the product is switched on, press and hold
2 seconds to enable or disable the automatic power-off function.
When the automatic power-off function is enabled,
the display . In this case, the product switches off automatically if no
3 ] [
button has been pressed for approx. 20 minutes.
42 GB/IE
. The display shows all segments and
3 ] [
again.
for approx.
4 ] [
is shown on
8 ] [
˜ Turning the backlight on or off
When the product is switched on, press and hold
2 seconds to turn the backlight on or off.
˜ Selecting the unit of measurement
Press UNIT to enter the setting mode. SET
1.
[ 5 ]
display .
3 ] [
2. The wind speed unit m/s
15 ] [
this unit is selected.
Repeatedly press UNIT
3.
5 ] [
4. When the desired unit flashes on the display
After 2 seconds, the selected unit is saved automatically. The product
returns to measurement mode.
for approx.
6 ] [
is shown on the
13 ] [
flashes on the display . This means, that
3 ] [
to toggle between the available units.
, stop pressing UNIT
3 ] [
.
5 ] [