Product Characteristics - Kidwell Blissy Basic Benutzerhandbuch

at the lowest setting or 200 mm or higher with the cot bottom at the highest setting.
• To prevent baby suffocation, remove the plastic cover from the product before use.
The wrapping should then be destroyed or kept out of the reach of children and
infants.
• Do not use the cot with more than one mattress - risk of suffocation.
Drawings and photos are for illustrative purposes only. The actual appearance of the
product may differ from the visualisation in the product manual.

PRODUCT CHARACTERISTICS

• For children aged 6-36 months (weight
up to 15 kg).
• Quick unfolding and folding system.
• LockGuard anti-folding protection
increases the child's safety.
• Entrance for older children allowing
them to get in and out of the bed on
SET PARTS
A
Crib
B Mattress
UNFOLDING THE CRIB
Take the cot out of the bag (C) and unfasten the Velcro straps of the mattress (B), then:
1. Place the bed (A) vertically and slide all corners outwards.
2. Pull each of the upper crossbars vigorously upwards until the locks are engaged.
NOTE: The locks will not work if the bottom of the bed is laid flat. Make sure that all
crossbars are locked in a horizontal position.
3. Then press the middle part of the bed bottom downwards (Fig. 3), until the lower
locks are engaged.
MATTRESS FIXING
1. Place the mattress (B) on the bottom of the cot.
2. Pass 4 the hook and loop straps through the respective holes in the cot bottom and
secure from underneath to ensure safety.
their own.
• Wheels make it easy to move the bed.
• Transport bag included.
• Full compliance with European safety
standards EN 716-1:2017+AC:2019.
C Transport bag
9