i
7.1 Intended use
Only use the RolloTron Swivel Winder Standard for open-
ing and closing roller shutters with a permissible belt.
Only use original spare parts from RADEMACHER
◆ By doing so, you avoid risk of malfunctions and da-
mage to your RolloTron Swivel Winder Standard.
◆ As the manufacturer, we provide no guarantee for the
use of third-party components and accept no liability
for consequential damage resulting from such.
◆ All repairs to the RolloTron Swivel Winder Standard
must be undertaken by authorised customer service
personnel.
i
7.2 Improper use
Using the RolloTron Swivel Winder Standard for purposes
other than previously mentioned is impermissible.
Operating conditions
◆ Only operate the RolloTron Swivel Winder Standard
in dry rooms.
◆ An easily accessible 230 V/50 Hz mains socket must
be available at the installation site.
◆ The roller shutters must run up and down smoothly
and should not stick.
◆ The mounting surface for the RolloTron Swivel
Winder Standard must be flat.
There is a risk to life caused through short circuiting
and electric shocks if the RolloTron Swivel Winder
Standard is used outside.
◆ Never install or operate the RolloTron Swivel
Winder Standard outside.
EN
59