Fitting The Oven - KKT KOLBE SET6007ED Benutzerhandbuch

7.3 Fitting the oven

• Prepare the installation opening for installing
the oven according to the dimensions shown
in the following figure (dimensions in mm).
• Have the oven connected to the mains by a certi-
fied electrician according to the instructions in the
following chapter.
• Slide the oven partially into the prepared installa-
tion opening and have the hob connected to the
mains by a certified electrician according to the
instructions in the following chapter.
• Then push the oven completely into the installation
opening, taking care not to bend, squeeze or twist
the cables.
• Open the appliance door and fix the oven to the
built-in furniture by screwing the screws supplied
into the mounting holes on the left and right of the
frame of the cooking chamber.
Note:
To avoid damage, screw in the screws
by hand and do not overtighten them.
Installation
33