Storage; Repairs; Disposal - Hitachi ML140E Betriebsanleitung

Changing the spark plug
„ Follow the instructions of the manufacturer of the
motor.
Wheel drive (optional)
Adjusting the Bowden cable
If the wheel drive can no longer be switched on or off
while the motor- is running, the related Bowden cable
needs to be adjusted.
Caution!
Adjust the Bowden cable only when the motor is
switched off.
1. Turn the adjuster on the Bowden cable in the
direction of the arrow (
2. To test the cable setting, switch on the motor and
switch on the wheel drive.
3. If the wheel drive is still not working, the lawnmower
must be taken to a service point or an authorised
specialist.
Lubricating the drive pinion
„ From time to time, lubricate the drive pinion on the
transmission shaft
The wheel drive gearing is maintenance free.

Storage

Caution - risk of explosion!
Do not store the equipment where there are
naked flames or heat sources.
„ Allow the motor to cool down
„ Store the equipment in an area which is kept dry,
and which cannot be accessed by children or
unauthorised persons
„ Drain the fuel tank
„ Pull out the spark plug connector
470 591_c
14).

Repairs

Repairs should be carried out only by a service point or
an authorised specialist.

Disposal

Do not dispose of old equipment,
batteries or accumulators as household
waste!
Machine, packaging, and accessories were made
with recyclable materials, and should be disposed of
.
accordingly
GB
23