Dispensing; Anti-Drip System - witeg LABmax eco Gebrauchsanleitung

4.3 Dispensing

To avoid personal injury from chemicals, wear eye
protection and use appropriate safety equipment and
clothing. Please follow all safety instructions as well
as the operating procedures in this manual.
Raise the outer housing (2) until it stops itself in
according to the set volume. The set volume will
be dispensed into the collecting vessel by pressing
down the outer housing to the lowest point. The mo-
0°
vements should be smooth and constant to achieve
an exact ejection volume.

4.4 Anti-drip system

Turn the discharge tube at 180°. The liquid from the
discharge tube will now rinse back into the bottle. Any
further dispensing of liquid is not possible in this posi-
tion.
Turn the discharge tube at 90° in order to seal the
dispenser.
180°
In addition you can use optional accessories to ensure
protection against humidity, dust or bacteria or to avoid
the emission of gases and strong smell (see p. 24).
19