Explanation Of Symbols; Safety Instructions - Conrad 85 64 33 Bedienungsanleitung

3. Explanation of Symbols

The flash icon in a triangle is used to alert you of potential personal injury hazards such as
electric shock.
The exclamation mark in a triangle indicates a particular risk in handling, operating and
control.
The hand symbol indicates special tips and operating information.

4. Safety Instructions

In case of damage caused by not complying with these safety instructions the guarantee
will be rendered void! We do not accept liability for damage to property and injury to per-
sons caused by mishandling or non-compliance with the safety instructions!
The exclamation mark indicates important notes in these operating instructions that should
always be observed.
• The product must not be modified or rebuilt, as not only the CE approval will become void but also
the warranty/guarantee.
• The system components must not be exposed to heavy mechanical stress.
• The camera is water-resistant and suitable for outdoor use.
• The monitor and remote control must not get damp or wet. They are only designed for use in dry
ambient conditions (interior of vehicle).
• Although the rear view camera system does make parking easier, the driver remains fully responsi-
ble when parking. Observe road traffic regulations. Use of the system at more than 3 km/h is at your
own risk and not recommended. There is a high risk of accident. A rear view camera system is inten-
ded to increase safety and protection. It is not intended to replace other safe driving habits. It is
recommended that you check and look carefully before reversing. This applies especially when
pedestrians are present, where cross traffic passes, or when it is dark. As a result of the mode of ope-
ration of the device, some obstacles may not be detected or may be detected unreliably. In such
cases, the manufacturer accepts no liability for resulting damages.
• When installing and operating the set, observe the valid registration directives and the traffic regula-
tions.
• Only a vehicle power supply of 12 V/DC or 24 V/DC may be used to operate the system. Never con-
nect the system to any other power supply.
• Extra care should be taken when starting up the system. Please also follow these operating instructi-
ons.
• Wireless devices such as WLAN routers, bluetooth devices or mobile phones can interfere with the
operation of the monitor. In such a case, the monitor will show rolling lines, blurry pictures or static
pictures.
• When installing the device, make sure the connection cables are not squeezed, squashed or dama-
ged by sharp objects.
20