Using The Appliance - Krups 3MIX6000 Bedienungsanleitung

appliance's electrical components. Never place the appliance,
the power cord or the plug in water or any other liquid.
Do not use your appliance if it is not working properly or if it
�
has been damaged.
Please contact your approved service centre.
�
Any maintenance other than routine cleaning and upkeep by
�
customers must be carried out by an approved service centre.
The power cord must not be placed near or come into contact
�
with the hot parts of the appliance, sources of heat or sharp
corners.
Do not move or unplug the appliance by pulling on the cord.
�
For your own safety, only use accessories and spare parts
�
which are suitable for your appliance.
To avoid electric shocks, ensure that your fingers do not come
�
into contact with the plug pins when you plug in or unplug the
appliance.
Do not plug any other appliances into the same plug hole using
�
adapters. Electric overload is likely to damage the appliance
or cause an accident. Only use an extension lead after having
checked that it is in perfect working order.
For your safety, this appliance complies with the applicable
�
standards and regulations - Low voltage directive –
Electromagnetic compatibility - The environment - Materials
in contact with food.
Do not touch the whisks, mixers, the multi-blade mixer
�
(depending on model) or the blender base when the appliance
is in operation. Keep long hair and scarves etc. away from the
accessories when in operation.
Do not touch the beaters or mixers and do not insert any
�
object (knife, fork, spoon, etc.) to avoid hurting yourself and
causing an accident to others or damaging the appliance.
You may use a spatula once the product is not in operation.
�
To avoid all accidents, make sure that your hair, clothes and
�
other objects do not get caught in the moveable parts of the
appliance.
Do not attach different accessories at the same time.
�
Always use the accessory with the mixer positioned on a flat,
�
clean and dry surface before connect the appliance.
8
Always check that the speed selector is at "0" before turning
�
the appliance on.
To avoid damage to the appliance, never place the appliance
�
or its accessories in the freezer, oven or microwave.
The appliance and its accessories have been designed for
�
preparing food products. They must not be used for mixing
other products.

USING THE APPLIANCE

�
Clean the whisks and hooks before use. Rinse and dry them.
�
Insert the whisks (B) or hooks (C) until they are fully locked in place. Always insert the
accessory fitted with a toothed ring into the opening indicated on the hand-mixer by a
ring which is also toothed (fig.2).
�
Plug in the hand-mixer.
�
Depending on the quantity being prepared, place the ingredients into a suitable container
(bowl or cup).
�
Place the whisks or hooks into the container and start the hand-mixer using the control
(a2).
�
To continue preparation, select a faster speed (fig.3).
�
Your hand-mixer is fitted with a Turbo control (a3), which enables you to use all the power
of your hand-mixer instantly just by pressing a button (fig.4).
�
The whisks are used for light preparations as whisked egg whites.
�
The hooks are used for heavier preparations.
�
When you have finished, return the control (a2) to position "0".
�
Unplug the hand-mixer.
�
Remove the whisks or hooks by pushing the ejection control (a3) (fig.5).
STORAGE
Do not store your appliance in a humid environment.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
Check:
�
That it is plugged in correctly.
�
That the accessories are correctly locked.
�
The position of the speed selector (C2): turn it to position "0" and then select the
desired speed again.
�
Your appliance still does not work? Contact an approved service center (see list in last
page of this booklet).
9