Herunterladen Inhalt Inhalt Diese Seite drucken
Vorschau ausblenden Andere Handbücher für Algarve:
Inhaltsverzeichnis
Algarve
®
Handleiding
Notice de montage
Anleitung
Manual
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Renson Algarve

  • Seite 1 Algarve ® Handleiding Notice de montage Anleitung Manual...
  • Seite 2: Inhaltsverzeichnis

    Algarve ® INHOUDSTAFEL TABLE DES MATIÈRES INHALTSANGABE INDEX Belangrijke veilig heids- en montage- Instructions importantes de sécurité et Wichtige Sicherheits- und Important safety and assembly instructies de montage Montagehinweise instructions Bouwtypes & afmetingen Types d’installation & dimensions Bauarten und Abmessungen Types of installation &...
  • Seite 3 32. Montage du capteur de vent 32. Installing the wind sensor 32. Montage des Windsensors 33. Afwerking kroonlijst bij Algarve 33. Finition de la corniche pour l’Algarve 33. Finishing cornice with the Algarve ‘Classic Line’ (optie) ‘Classic Line’ (option) 33. Endbearbeitung des Gesimses bei “Classic Line”...
  • Seite 4 Algarve dient te gebeuren door RENSON ® doit être effectuée par un profes- Montage der RENSON ® Algarve muss durch Algarve should be done by a specialist. een vakman. sionnel. einen Fachmann erfolgen. RENSON ® reserves the right to make tech- RENSON ®...
  • Seite 5: Belangrijke Veilig Heids- En Montage- Instructies

    Lack nicht zu beschä- • Haal het systeem met de nodige omzichtig- digen. • See installation instructions. Algarve ® must Installation du système heid uit de verpakking. • Entnehmen Sie das System mit der nötigen be installed as described in the installation •...
  • Seite 6 • Verwenden Sie nur die mitgelieferten Teile RENSON company with your product; ® terwijl het dak beweegt. rechange de la société RENSON , sinon der Firma RENSON . Andernfalls verfallen otherwise, the guarantee terms and condi- ® ®...
  • Seite 7 Algarve ® 1. Belangrijke veiligheids- en 1. Instructions importantes 1. Wichtige Sicherheits- 1. Important safety and montage-instructies de sécurité et de montage und Montagehinweise assembly instructions (vervolg 2) (suite 2) (Fortsetzung 2) (cotinued 2) Elektrische aansluiting Commande électrique • Weder an den Pfosten noch an den Seiten- Electrical connections •...
  • Seite 8: Bouwtypes & Afmetingen

    Algarve ® 2. BOUWTYPES & 2. TYPES D’INSTALLATION 2. BAUARTEN UND 2. TYPES OF INSTALLA- AFMETINGEN & DIMENSIONS ABMESSUNGEN TION & DIMENSIONS A. Enkelvoudige bouwtypes A. Type d’installation simple A. Einzelne Bauarten A. Single types of installation A1. Vrijstaand A1. Autoportante A1.
  • Seite 9 Algarve ® SPAN - AANZICHT SPAN - AANZICHT SPAN - Span (S) (min. 800 / max. 4500) Pivot (P) (min. 1110 / max. 6055 / stap 21 Span (S) (m SPAN - AANZICHT Span (S) (min. 800 / max. 4500) Pivot (P) (min.
  • Seite 10: Montagevoeten

    Algarve ® 3. MONTAGEVOETEN 3. PIEDS DE MONTAGE 3. MONTAGEFÜSSE 3. MOUNTING BASES A1 Zichtbare montagevoet A1 Pied de montage visible A1 Sichtbarer Montagefuß A1 Visible mounting base A2 Zichtbare montagevoet A2 Pied de montage visible A2 Sichtbarer Montagefuß A2 Visible mounting base (2 zijden afgekapt –...
  • Seite 11 Algarve ® Ø 11 mm Ø 14 mm...
  • Seite 12: Montage Van De Voetplaten

    5.1 Freistehende Bauart bases is 13 cm more than the Pivot and montagevoeten is de overmeten maat van • En cas de montage de l’Algarve avec des Span dimensions. de voeten 13 cm groter dan de pivot- en pieds de montage visibles, la dimension Consult the drawings in chapter 3 ‘Mount-...
  • Seite 13 Algarve ® OUTSIDE M8 x 40 M8 x 40 (G6025204) (G6025204) Span S + 14 cm 13 cm Pivot P + 14 cm 13 cm...
  • Seite 14: 5.2 Gevelmontage Bouwtype

    NULPAS. sollen, in der Höhe in Bezug auf das Null- qui seront montés sur le mur, en hauteur to the BASELINE. Teken de loodlijnen, de Algarve Span en niveau. ® par rapport au POINT ZERO.
  • Seite 15 Algarve ® 13 cm 13 cm 6,5 cm 6,5 cm Ø 12 mm Span ≤ 2000 mm Span ≤ 3000 mm Span ≤ 4500 mm...
  • Seite 16 Algarve ® PIVOT kaderprofiel aan de muur Profil cadre PIVOT contre le mur Rahmenprofile PIVOT an der Wand montiert PIVOT frame profile mounted against the wall (Pivot volgens stap van de lamel) (Pivot selon le pas de lame) (Pivot gemäß pro Lamellenschritt) (Pivot according to the blade pitch) 1156.5...
  • Seite 17 296,5 383,5 296,5 296,5 383,5 296,5 383,5 273,5 Algarve ® 383,5 296,5 296,5 383,5 296,5 296,5 383,5 296,5 273,5 383,5 296,5 273,5 383,5 296,5 383,5 296,5 383,5 296,5 Pivot ≤ 2000 mm Pivot ≤ 3000 mm Pivot ≤ 4000 mm 296,5 383,5 296,5...
  • Seite 18: Plaatsen Van De Montagevoeten

    Algarve ® 6. PLAATSEN VAN DE 6. INSTALLATION DES 6. PLATZIEREN DER 6. INSTALLING THE MONTAGEVOETEN PIEDS DE MONTAGE MONTAGEFÜSSE MOUNTING BASES • Kijk na waar de motor gemonteerd zal • Vérifiez où le moteur doit être monté. • Prüfen Sie, wo der Motor montiert werden •...
  • Seite 19 Algarve ® POWER CABLE 90° 230V 90° 90° 90° Hoekkolom Tussenkolom Colonne d’angle Colonne intermédiaire Eckpfosten Zwischenpfosten Corner column Intermediate column...
  • Seite 20: Platzieren Der Montagefüße

    Algarve ® 6. Plaatsen van de 6. Installation des pieds de 6. Platzieren der Montagefüße 6. Installing the mounting montagevoeten montage bases (vervolg) (suite) (Fortsetzung) (continued) • Schroef één montagevoet vast op zijn • Fixez 1 pied de montage à son empla- •...
  • Seite 21 Algarve ®...
  • Seite 22: Positioneren Kaderprofielen

    Algarve ® 7. POSITIONEREN 7. POSITIONNEMENT DES 7. POSITIONIEREN DER 7. POSITIONING FRAME KADERPROFIELEN PROFILS CADRE RAHMENPROFILE PROFILES • Leg de pivot- en spanprofielen op hun • Positionnez les profils cadre Span et Pivot • Legen Sie die Pivot- und Span-Profile an •...
  • Seite 23 Algarve ® PIVOT SPAN MOTOR SIDE...
  • Seite 24: Montage Van Het Kader Bij Vrijstaand Bouwtype

    Algarve ® 8. MONTAGE VAN HET 8. MONTAGE DU CADRE 8. MONTAGE DES 8. MOUNTING THE KADER BIJ VRIJSTAAND EN CAS DE TYPE RAHMENS BEI FRAME WITH BOUWTYPE D’INSTALLATION FREISTEHENDEN A DETACHED AUTOPORTANTE BAUTYPEN CONSTRUCTION TYPE • Start de montage van de kaderprofielen aan de kant van de reeds gefixeerde voet.
  • Seite 25 Algarve ® START M8 x 20 (G6025211) 230V...
  • Seite 26: Tussenbalk Monteren

    Algarve ® 9. TUSSENBALK 9. MONTAGE DE 9. MONTAGE DES 9. MOUNTING THE MONTEREN LA POUTRE ZWISCHENBALKEN INTERMEDIATE PROFILE INTERMÉDIAIRE (enkel voor bouwtypes met tussenbalk) (nur für Bauarten mit Zwischenbalken) (only applies to types of installation with intermediate beam) (uniquement pour les types d’installation •...
  • Seite 27 Algarve ® M6 x 70 (G6020988) M8 x 20 M6 x 20 (G6025211) (6025188) M8 x 20 (G6025211)
  • Seite 28: Controle Diagonalen

    Algarve ® 10. CONTROLE 10. CONTRÔLE DES 10. ÜBERPRÜFUNG DER 10. CHECKING THE DIAGONALEN DIAGONALES DIAGONALEN DIAGONALS • Controleer de diagonalen (D1 = D2) en de • Contrôlez les diagonales (D1= D2) et la • Überprüfen Sie die Diagonalen (D1 = D2) •...
  • Seite 29 Algarve ® 90° 90° 90° 90° 90° 90° 90° 90°...
  • Seite 30: Plaatsen Afdekkappen

    Algarve ® 11. PLAATSEN 11. MONTAGE 11. PLATZIEREN SIE DIE 11. POSITION THE AFDEKKAPPEN DES PLAQUES ABDECKKAPPEN COVER PLATES D’OBTURATION • Neem de eerder geplaatste binnenafdek- • Entfernen Sie die zuvor platzierte innere • Remove the inner cover plate which had kap terug weg.
  • Seite 31 Algarve ® M8 x 20 (G6025211) “CLICK” “CLICK” INSIDE...
  • Seite 32 Algarve ® 11. Plaatsen afdekkappen 11. Montage des plaques 11. Platzieren Sie die 11. Position the cover plates d’obturation Abdeckkappen (vervolg) (suite) (Fortsetzung) (continued) • Bij een enkelvoudig bouwtype met tussen- • En cas de version simple avec poutre inter- •...
  • Seite 33 Algarve ® M 4 x 25 (G6001753) OUTSIDE M8 x 20...
  • Seite 34: Afdichten Binnenkant Hoekverbinding

    Algarve ® 12. AFDICHTEN 12. ÉTANCHEMENT DU 12. ABDICHTEN DER 12. SEALING INSIDE BINNENKANT CÔTÉ INTÉRIEUR INNENSEITE DER CORNER JOINT HOEKVERBINDING DES JONCTIONS ECKVERBINDUNG • Degrease the in- and outside of the D’ANGLE endcaps with the included degreaser FA • Ontvet de eindstukken met de meegele- •...
  • Seite 35 Algarve ® ± 2 min ± 2 min...
  • Seite 36 Algarve ® 12. Afdichten binnenkant 12. Etanchement du côté 12. Abdichten der Innenseite 12. Sealing inside corner joint hoekverbinding intérieur des jonctions der Eckverbindung (vervolg) (continued) d’angle (suite) (Fortsetzung) • Breng het eindstuk in de externe goot. • Install the endcap in the external gutter.
  • Seite 37 Algarve ®...
  • Seite 38: Montage Van De Lamellen Voor Pivot Volgens Stap Van De Lamel

    Algarve ® 13. MONTAGE VAN DE 13. MONTAGE DES 13. MONTAGE DER 13. MOUNTING THE LAMELLEN VOOR LAMES POUR PIVOT LAMELLEN FÜR BLADES FOR PIVOT PIVOT VOLGENS STAP SELON LE PAS DE PIVOT GEMÄSS PRO ACCORDING TO THE VAN DE LAMEL...
  • Seite 39 Algarve ® MOTOR MOTOR MOTOR MOTOR M4 x 12 M4 x 12 3,5 x 16 (G6000715)
  • Seite 40: Montage Der Lamellen Für Pivot Gemäß Pro Lamellenschritt

    Algarve ® 13. Montage van de lamellen 13. Montage des lames pour 13. Montage der Lamellen 13. Mounting the blades for voor Pivot volgens stap Pivot selon le pas de lame für Pivot gemäß pro Pivot according to the van de lamel...
  • Seite 41 Algarve ® G6025204 M8 x 40...
  • Seite 42: Montage Van De Lamellen Voor Pivot Per Mm

    Algarve ® 14. MONTAGE VAN DE 14. MONTAGE DES 14. MONTAGE DER 14. MOUNTING THE LAMELLEN VOOR LAMES POUR PIVOT LAMELLEN FÜR PIVOT BLADES FOR PIVOT PIVOT PER MM AU MM PRÈS AUF DEN MM ON THE MM • Er zijn 2 mogelijke draairichtingen van •...
  • Seite 43 Algarve ® MOTOR 3,5 x 16 (G6000715) MOTOR M4 x 12...
  • Seite 44 Algarve ® 14. Montage van de lamellen 14. Montage des lames pour 14. Montage der Lamellen 14. Mounting the blades for voor Pivot per mm Pivot au mm près für Pivot auf den mm Pivot on the mm (vervolg 1) (suite 1)
  • Seite 45 Algarve ® MOTOR MOTOR 3,5 x 16...
  • Seite 46 Algarve ® 14. Montage van de lamellen 14. Montage des lames pour 14. Montage der Lamellen 14. Mounting the blades for voor Pivot per mm Pivot au mm près für Pivot auf den mm Pivot on the mm (vervolg 2) (suite 2)
  • Seite 47 Algarve ® 3,5 x 16...
  • Seite 48 Algarve ® 14. Montage van de lamellen 14. Montage des lames pour 14. Montage der Lamellen 14. Mounting the blades for voor Pivot per mm Pivot au mm près für Pivot auf den mm Pivot on the mm (vervolg 3) (suite 3)
  • Seite 49 Algarve ® G6001737 M8 x 40...
  • Seite 50: Montage Van De Motor

    Algarve ® 15. MONTAGE VAN DE 15. MONTAGE DU 15. MONTAGE DES 15. MOUNTING THE MOTOR MOTEUR MOTORS MOTOR • Bevestig de motor aan de motorbeugel op • Fixez le moteur à l’équerre située sur le • Befestigen Sie den Motor am Motorbügel •...
  • Seite 51 Algarve ®...
  • Seite 52: Aansluiten Stuur Kast + Instellen Bediening Voor Lamellendak

    FOR THE LOUVRED COMMANDE DE LA LAMELLENDACH ROOF • Bij een Algarve is de sturing nog niet TOITURE EN LAMES verbonden met de motor! • Bei Algarve ist die Steuerung noch nicht • In Algarve, the motor control has not yet...
  • Seite 53 Algarve ® Green/groen vert/Grün Roof motor Yellow/geel jaune/Gelb Power supply 230V...
  • Seite 54 Algarve ® 16. Aansluiten stuur kast + 16. Raccordement du 16. Anschliessen des 16. Connecting the control instellen bediening voor boîtier de commande + Steuerkastens + Einstellen box + setting control for lamellendak programmation de la der Bedienung für the louvred roof (vervolg 1)
  • Seite 55 Algarve ® 0,5 sec. Check direction Only if direction is not correct > 5 sec. CLOSE OPEN DOWN...
  • Seite 56 Algarve ® 16. Aansluiten stuur kast + 16. Raccordement du 16. Anschliessen des 16. Connecting the control instellen bediening voor boîtier de commande + Steuerkastens + Einstellen box + setting control for lamellendak programmation de la der Bedienung für the louvred roof (vervolg 2)
  • Seite 57 Algarve ® 0,5 sec. END POSITION CLOSE Snow position 0,5 sec. 0,5 sec. 5 sec. 0,5 sec. END POSITION END POS prog Situo 5 Variation A/M io Pure II CLOSE CLOSE...
  • Seite 58: Wijziging Vorst/Sneeuw Functie Via Set&Go Installatietool

    Algarve ® 17. WIJZIGING VORST/ 17. MODIFICATION DE 17. ÄNDERUNG 17. CHANGING THE SNEEUW FUNCTIE LA FONCTION GEL/ DER FROST-/ FROST/SNOW VIA SET&GO NEIGE VIA L’OUTIL SCHNEEFUNKTION PROTECTION INSTALLATIETOOL D’INSTALLATION MIT DEM SET&GO- FUNCTION VIA SET&GO INSTALLATIONSTOOL THE SET&GO Bij uw bestelling had u de mogelijkheid om...
  • Seite 59 Algarve ® Always connect 1 rain sensor per motor control. Rain sensors must not be interconnected. Always connect 1 rain sensor per motor control. Rain sensors must not be interconnected. Rain sensor Rain sensor Roof motor control box 2.0 Roof motor control box 2.0...
  • Seite 60 Algarve ® 17. Wijziging vorst/sneeuw- 17. Modification de la 17. Änderung der Frost-/ 17. Changing the frost/snow functie via Set&Go fonction gel/neige via Schneefunktion mit dem protection function via the installatietool l’outil d’installation Set&Go-Installationstool Set&Go installation tool (vervolg 1) Set&Go (suite 1) (Fortsetzung 1)
  • Seite 61 Algarve ®...
  • Seite 62 Conseil : chert wird. C leave the blades open slightly (5 to 10°) Renson: verticaal 90°) − Position gel (recommandée par Renson : to prevent them from freezing shut. Tipp: ouvrir un peu (5 à 10°) les lames contre − Snow position recommended by Renson: Opmerking: la congélation)
  • Seite 63 Algarve ®...
  • Seite 64: Terugkeren Naar De Fabrieks- Instellingen Voor De Sturing Van Het Lamellendak

    Algarve ® 18. TERUGKEREN NAAR 18. REVENIR AUX 18. ZURÜCKSETZEN DER 18. RETURNING THE DE FABRIEKSINSTEL- PROGRAM MATIONS MOTORSTEUERUNG MOTOR CONTROL TO LINGEN VOOR DE USINE POUR LA AUF DIE WERKS- FACTORY SETTINGS STURING VAN HET COMMANDE DE LA EINSTELLUNGEN...
  • Seite 65 Algarve ® 2 sec. 8 sec. 2 sec. 2 sec. 8 sec. 2 sec. 4 sec. 4 sec. Junction box 2 sec. 8 sec. 2 sec. 24 V Motor control 10 sec. MOTOR (blade roof) TRANSFO Led control LEDs 230 V...
  • Seite 66: Monteren Van De Lineo Led Lamellen (Optie)

    Algarve ® 19. MONTEREN VAN DE 19. MONTAGE DES 19. MONTAGE DER 19. MOUNTING THE LINEO LED LAMELLEN LAMES LINEO LED LINEO LED-LAMELLEN LINEO LED BLADES (OPTIE) (OPTION) (OPTIONAL) (OPTIONAL) • De kabel(s) van de LED-lamellen zijn voor- • Le(s) câble(s) de(s) la lame(s) LED est (sont) •...
  • Seite 67 Algarve ®...
  • Seite 68: 20. Afwerking

    Überprüfen Sie die • Clips de afwerkingsprofielen op de 2 Funktions weise der Lamellen. E • Give your client the Algarve user manual. binnenzijden van de kolommen. F • Remettez le manuel d’utilisation Algarve à The client should keep those documents votre client.
  • Seite 69 Algarve ® Ø 3 mm 3,5 x 16 (G6000731) 3,5 x 16 OUTSIDE...
  • Seite 70: Montage Van Protecto

    Algarve ® 21. MONTAGE VAN 21. MONTAGE DE 21. MONTAGE VON 21. MOUNTING OF PROTECTO PROTECTO PROTECTO PROTECTO 21.1 Plaatsen van de 21.1 Pose des blocs de 21.1 Gleitblöcke einsetzen 21.1 Fitting the sliding glijblokjes op het coulissement sur le...
  • Seite 71 Algarve ®...
  • Seite 72: Aanbrengen Van De Beschermingstape Op De Lamel

    Algarve ® 21. Montage van Protecto 21. Montage de Protecto 21. Montage von Protecto 21. Mounting of Protecto (vervolg 1) (suite 1) (Fortsetzung 1) (continued 1) 21.2 Aanbrengen van de 21.2 Placement de la bande 21.2 Schutztape an der 21.2 Applying the protective...
  • Seite 73 Algarve ®...
  • Seite 74: Monteren Van Het Afsluitprofiel

    Algarve ® 21. Montage van Protecto 21. Montage de Protecto 21. Montage von Protecto 21. Mounting of Protecto (vervolg 2) (suite 2) (Fortsetzung 2) (continued 2) 21.3 Monteren van het 21.3 Montage du profil 21.3 Montage des 21.3 Fitting the sealing afsluitprofiel d’obturation...
  • Seite 75 Algarve ® M6 x 16...
  • Seite 76 Algarve ® 22. MONTAGE 22. MONTAGE 22. MONTAGE DES 22. MOUNTING THE FIXSCREEN 100 FIXSCREEN 100 FIXSCREEN 100 FIXSCREEN 100 SLIM F SLIM F SLIM F SLIM F • Maak de demonteerbare afdekplaat van • Détachez le profil inférieur amovible du • Entfernen Sie die demontierbare Abdeck- •...
  • Seite 77 Algarve ®...
  • Seite 78: Montage Des Fixscreen 100 Slim F (Fortsetzung 1)

    Algarve ® 22. Montage Fixscreen 100 22. Montage Fixscreen 100 22. Montage des Fixscreen 22. Mounting the Fixscreen Slim F Slim F 100 Slim F 100 Slim F (vervolg 1) (suite 1) (Fortsetzung 1) (continued 1) • Demonteer de 4-delige zijgeleiders. A • Retirer les guides latéraux en 4 parties. A •...
  • Seite 79 Algarve ® M6 x 16 mm (G0002104) Ø 5,25 mm...
  • Seite 80: Montage Des Fixscreen 100 Slim F (Fortsetzung 2)

    Algarve ® 22. Montage Fixscreen 100 22. Montage Fixscreen 100 22. Montage des Fixscreen 22. Mounting the Fixscreen Slim F Slim F 100 Slim F 100 Slim F (vervolg 2) (suite 2) (Fortsetzung 2) (continued 2) • Schroef het achterstuk van de zijgeleider • Vissez la partie arrière du guide latéral •...
  • Seite 81 Algarve ® Buitenzijde Extérieur Außenseite Outside Ø 3,5 mm 4,2 x 9,5 mm (G0002251)
  • Seite 82: Montage Des Fixscreen 100 Slim F (Fortsetzung 3)

    Algarve ® 22. Montage Fixscreen 100 22. Montage Fixscreen 100 22. Montage des Fixscreen 22. Mounting the Fixscreen Slim F Slim F 100 Slim F 100 Slim F (vervolg 3) (suite 3) (Fortsetzung 3) (continued 3) • Monteer het middenstuk van de zijgelei- • Montez la pièce maîtresse des coulisses •...
  • Seite 83 Algarve ® M4 x 10 (G0002682) Buitenzijde / Extérieur Buitenzijde / Extérieur Außenseite / Outside Außenseite / Outside Buitenzijde / Extérieur Außenseite / Outside M4 x 20 (G0002686)
  • Seite 84: Instellen Eind Punten Fix Screen

    Algarve ® 23. INSTELLEN EIND- 23. RÉGLAGE DES FINS 23. EINSTELLEN DER 23. SETTING FIXSCREEN PUNTEN FIX SCREEN DE COURSE DU ENDPUNKTE DES END POINTS FIXSCREEN FIXSCREEN Opmerking: Controleer of het apparaat Note: Check whether the device is connected voorzien is van voeding 230V.
  • Seite 85 Algarve ® 0,5 sec. 0,5 sec. > 5 sec. TEST > 5 sec. TEST TEST TEST 0,5 sec. 0,5 sec.
  • Seite 86 Algarve ® 23. Instellen eind punten 23. Réglage des fins de 23. Einstellen der Endpunkte 23. Setting Fixscreen end Fix screen course du Fixscreen des Fixscreen points (vervolg) (suite) (Fortsetzung) (continued) • De Fix screen gaat automatisch naar bene- • Le Fix screen va automatiquement vers le •...
  • Seite 87 Algarve ® 0,5 sec. 0,5 sec. 0,5 sec. 0,5 sec. STOP STOP 0,5 sec. 0,5 sec. > 2 sec. 0,5 sec. > 2 sec. STOP prog STOP Situo 5 Variation A/M io Pure II...
  • Seite 88: Revenir Aux Réglages Usine Du Fix Screen

    Algarve ® 24. TERUGKEREN NAAR 24. REVENIR AUX 24. WIEDERHERSTELLUNG 24. RETURNING TO THE DE FIXSCREEN RÉGLAGES USINE DU DER WERKS EINSTEL- FIXSCREEN DEFAULT FABRIEKS- FIX SCREEN LUNGEN DES SETTINGS INSTELLINGEN FIXSCREEN • Branchez l’alimentation 230 V. A • Switch on the power 230V. A •...
  • Seite 89 Algarve ® 2 sec. 8 sec. 2 sec. 2 sec. 8 sec. 2 sec. 2 sec. 2 sec. 8 sec. 8 sec. 2 sec. 2 sec. > 7 sec. prog Situo 5 Variation A/M io Pure II...
  • Seite 90 Algarve ® 25. MONTAGE 25. MONTAGE D’UNE 25. MONTAGE DES 25. MOUNTING OF A VERSCHOVEN OF COLONNE DÉCALÉE VERSCHOBENEN SHIFTED COLUMN TUSSENKOLOM OU COLONNE PFOSTENS ODER OR ADDITIONAL INTERMÉDIAIRE ZUSÄTZLICHEN COLUMN • Op de plaats van de verschoven of PFOSTENS tussenkolom zijn reeds bevestigingsga- •...
  • Seite 91 Algarve ® M8 x 20 (G6025211) Tussenkolom Hoekkolom Colonne intermédiaire Colonne d’angle Zwischenpfosten Eckpfosten Intermediate column Corner column M8 x 20 (G6025211) OUTSIDE INSIDE...
  • Seite 92 Algarve ® 26. PLAATSING UPDOWN 26. MONTAGE DE 26. MONTAGE VON 26. FITTING AN LIGHT AAN PIVOT- L’ÉCLAIRAGE UP- UPDOWN LIGHT UPDOWN LIGHT ZIJDE (OPTIE) DOWN AU CÔTÉ AN DER PIVOT-SEITE ON THE PIVOT SIDE PIVOT (OPTION) (OPTIONAL) (OPTIONAL) • Plaatsing aan de Pivotzijde kan langs 1 pivotzijde of kan ook aan beide pivotzij- •...
  • Seite 93 Algarve ® S1 + S2: span ø 3 mm P1 + P2: pivot M: motor V: vaste lamel / lame fixe / feste Lamelle / fixed blade kabel / câble / Kabel / cable...
  • Seite 94: Fitting An Updown Light On The Pivot Side (Optional)

    Algarve ® 26. Plaatsing UpDown light 26. Montage de l’éclairage 26. Montage von UpDown 26. Fitting an UpDown aan pivot zijde (optie) UpDown au côté pivot Light an der Pivot-Seite light on the pivot side (option) (optional) (optional) (vervolg) (suite)
  • Seite 95 Algarve ®...
  • Seite 96 Algarve ® 27. PLAATSING UPDOWN 27. MONTAGE DE 27. MONTAGE VON 27. MOUNTING THE LIGHT AAN SPAN ZIJDE L’ÉCLAIRAGE UP- UPDOWN LIGHT UPDOWN LIGHT ON S2 (MOTOR ZIJDE) DOWN AU CÔTÉ AN SPANSEITE S2 THE SPAN SIDE S2 SPAN S2 (CÔTÉ...
  • Seite 97 Algarve ® S1 + S2: span P1 + P2: pivot M: motor V: vaste lamel / lame fixe / feste Lamelle / fixed blade kabel / câble / Kabel / cable ø 3 mm...
  • Seite 98 Algarve ® 27. Plaatsing UpDown light 27. Montage de l’éclairage 27. Montage von UpDown 27. Mounting the UpDown aan span zijde S2 (motor- UpDown au côté span S2 Light an Spanseite S2 light on the span side S2 zijde) (côté moteur)
  • Seite 99 Algarve ®...
  • Seite 100 Algarve ® 28. PLAATSING UPDOWN 28. MONTAGE DE 28. MONTAGE VON 28. MOUNTING THE LIGHT AAN SPAN- L’ÉCLAIRAGE UPDOWN LIGHT UPDOWN LIGHT ON ZIJDE S1 (NIET- UPDOWN AU CÔTÉ AN SPANSEITE S1 THE SPAN SIDE S1 MOTORZIJDE) SPAN S1 (CÔTÉ...
  • Seite 101 Algarve ® S1 + S2: span P1 + P2: pivot M: motor V: vaste lamel / lame fixe / feste Lamelle / fixed blade kabel / câble / Kabel / cable ø 3 mm...
  • Seite 102: Montage Von Updown Light An Spanseite

    Algarve ® 28. Plaatsing UpDown light 28. Montage de l’éclairage 28. Montage von UpDown 28. Mounting the UpDown aan span zijde S1 (niet- UpDown au côté span S1 Light an Spanseite light on the span side S1 motorzijde) (côté opposé au moteur)
  • Seite 103 Algarve ®...
  • Seite 104 Algarve ® 29. BEKABELING VAN DE 29. CÂBLAGE DE LA 29. VERKABELUNG VON 29. CABLING OF THE LED LED-STURING COMMANDE LED DER LED-STEUERUNG CONTROL • Indien u enkel witte leds moet aansluiten, • Si vous ne devez raccorder que des Leds •...
  • Seite 105 Algarve ® Dimmable Dimmable LED control LED control LED BEAM LINEO LED Dimmable Dimmable UP/DOWN LED control LED control 4 white channels 4 white channels LED BEAM LED BEAM Dimmable UP/DOWN UP/DOWN LED control 1 RGB channel 1 white + 1 RGB channel (max.
  • Seite 106 Algarve ® 29. Bekabeling van de 29. Câblage de la commande 29. Verkabelung von der 29. Cabling of the LED control LEDsturing LED-Steuerung (vervolg 1) (suite 1) (Fortsetzung 1) (continued 1) 29.1 Bekabeling van de LED 29.1 Câblage de la lame 29.1 Verkabelung der...
  • Seite 107 Algarve Lineo Led (white) ® LED (white) LED (white) LED (white) LED (white) White LED Receiver io 230V...
  • Seite 108 Algarve ® 29. Bekabeling van de 29. Câblage de la commande 29. Verkabelung von der 29. Cabling of the LED control LEDsturing LED-Steuerung (vervolg 2) (suite 2) (Fortsetzung 2) (continued 2) 29.2 Bekabeling van de 29.2 Câblage de l’UpDown 29.2 Verkabelung der 29.2 Cabling of the UpDown...
  • Seite 109 Algarve UpDown Led (white) ® LED (white) LED (white) LED (white) LED (white) White LED Receiver io 230V...
  • Seite 110 Algarve ® 29. Bekabeling van de 29. Câblage de la commande 29. Verkabelung von der 29. Cabling of the LED control LEDsturing LED-Steuerung (vervolg 3) (suite 3) (Fortsetzung 3) (continued 3) 29.3 Bekabeling van de 29.3 Câblage de l’UpDown 29.3 Verkabelung der 29.3 Cabling of the UpDown...
  • Seite 111 Algarve UpDown Led (RGB) ® LED (RGB) LED (RGB) LED (RGB) LED (RGB) RGB LED Receiver io 230V...
  • Seite 112: Réglage De L'éclairage

    Algarve ® 30. INSTELLEN LED 30. RÉGLAGE DE 30. EINSTELLEN DER 30. CONFIGURING THE VERLICHTING L’ÉCLAIRAGE LED LED-BELEUCHTUNG LED LIGHTING 30.1 Instellen UpDown en/ 30.1 Réglage de l’éclairage 30.1 Einstellen UpDown 30.1 Setting UpDown and/ of Lineo LED verlichting UpDown et/ou Lineo...
  • Seite 113 Algarve ® Led 4 white Led 4 white Led 3 white Led 2 white Led 3 white Led 1 white Led 2 white Led 4 white Led 1 white Led 3 white Led 2 white Led 1 white 230V 230V...
  • Seite 114: Einstellen Updown Led-Beleuchtung Rgb

    Algarve ® 30. Instellen LED verlichting 30. Réglage de l’éclairage LED 30. Einstellen der LED- 30. Configuring the LED Beleuchtung lighting (vervolg 1) (suite 1) (Fortsetzung 1) (continued 1) 30.2 Instellen UpDown LED 30.2 Réglage de l’éclairage 30.2 Einstellen UpDown 30.2 Setting UpDown LED...
  • Seite 115 Algarve ® Led 4 RGB Situo 1 Variation io Led 3 RGB Situo 5 io Situo 5 Variation A/M io Led 2 RGB Led 4 RGB Led 4 white Led 1 RGB Led 3 white Led 3 RGB Led 2 white...
  • Seite 116 Algarve ® 30. Instellen LED verlichting 30. Réglage de l’éclairage LED 30. Einstellen der LED- 30. Configuring the LED Beleuchtung lighting (vervolg 2) (suite 2) (Fortsetzung 2) (continued 2) 30.3 Situo Variation 30.3 Placer la télécommande 30.3 Situo Variation 30.3 Setting the Situo...
  • Seite 117 Algarve ® Situo 1 Variation io Situo 5 Variation A/M io PUSH prog prog Situo 5 Variation Situo 5 Variation A/M io Pure II A/M io Pure II PUSH Auto Manu Modus 1 Modus 2 Modus 3 Modus 4 Mode 1...
  • Seite 118 Algarve ® 30. Instellen LED verlichting 30. Réglage de l’éclairage LED 30. Einstellen der LED- 30. Configuring the LED Beleuchtung lighting (vervolg 3) (suite 3) (Fortsetzung 3) (continued 3) 30.4 Terugkeren naar de 30.4 Revenir aux 30.4 Zurücksetzen der 30.4 Returning the LED...
  • Seite 119 Algarve ® Situo 5 10 sec. 4 sec. 10 sec. prog Situo 5 Variation A/M io Pure II 4 sec.
  • Seite 120 • Es wird empfohlen, den Regensensor an the Algarve. The rain sensor already has te kleven op de Algarve. De regensensor pluie sur l’Algarve. Le capteur de pluie est die Algarve zu kleben. Der Regensensor ist mounting tape affixed to its back, and a is op de achterzijde reeds voorzien van équipé...
  • Seite 121 Algarve ® Max 1 rain sensor / Motor control box! Rain sensor Roof motor Power supply Max 1 rain sensor / Motor control box! Contact – (4) Contact + (3) 0 Vdc (2) + Vdc (1)
  • Seite 122 Algarve ® 32. MONTAGE VAN DE 32. MONTAGE DU 32. MONTAGE DES 32. INSTALLING THE WINDSENSOR CAPTEUR DE VENT WINDSENSORS WIND SENSOR • Plaats de Somfy Eolis windsensor op een • Placez le capteur de vent Somfy Eolis à un •...
  • Seite 123 Algarve ® OPTIO 5 sec. 5 sec. prog Situo 5 RTS Pure II 2 x 0,75 mm 230V - 50Hz 0,5 sec. > 7 sec. > 2 sec. 3 sec. 0,5 sec. 3 sec. prog prog prog prog Situo 5 RTS Pure II...
  • Seite 124 Algarve ® 33. AFWERKING 33. FINITION DE LA 33. ENDBEARBEITUNG 33. FINISHING CORNICE KROONLIJST BIJ CORNICHE POUR DES GESIMSES BEI WITH THE ALGARVE ALGARVE ‘CLASSIC L’ALGARVE ‘CLASSIC ALGARVE ‚CLASSIC “CLASSIC LINE” LINE’ (OPTIE) LINE’ (OPTION) LINE‘ (OPTIONAL) (OPTIONAL) • Bevestig de ophangbeugels met de voor- •...
  • Seite 125 Algarve ® M8 x 10 3,5 x 16 8 mm...
  • Seite 126: Endbearbeitung Des Gesimses Bei Algarve

    Algarve ® 33. Afwerking kroonlijst bij 33. Finition de la corniche 33. Endbearbeitung des 33. Finishing cornice on the Algarve ‘Classic Line’ pour l’Algarve ‘Classic Gesimses bei Algarve Algarve “Classic Line” Line’ ‚Classic Line‘ (vervolg 1) (suite 1) (Fortsetzung 1) (continued 1) •...
  • Seite 127 Algarve ®...
  • Seite 128 Algarve ® 33. Afwerking kroonlijst bij 33. Finition de la corniche 33. Endbearbeitung des 33. Finishing cornice on the Algarve ‘Classic Line’ pour l’Algarve ‘Classic Gesimses bei Algarve Algarve “Classic Line” Line’ ‚Classic Line‘ (vervolg 2) (suite 2) (Fortsetzung 2) (continued 2) •...
  • Seite 129 Algarve ® 3,5 X 16 M4 X 12 M4 X 20 3,5 X 16...
  • Seite 130: Haftungsausschluss

    (unforeseen) influence on the operation werking en levensduur van de Algarve. Zie sur le fonctionnement et la durée de vie de baren) Einfluss auf die Funktion und die and the lifetime of the Algarve. See the user gebruikershandleiding voor correcte l’Algarve.
  • Seite 131 Algarve ®...
  • Seite 132 All photos shown are for illustrative purposes; the actual product may vary due to product placement. Renson ® reserves the right to make technical changes to the products described in this brochure. The most recent product information, availability, and your local distributor can always be found on www.renson.eu...

Inhaltsverzeichnis