Herunterladen Diese Seite drucken

Märklin 49953 Handbuch Seite 17

Set mit modellen von hilfswagen

Werbung

Betrieb mit Mobile Station / Central Station
• Wagen aufgleisen. Der Wagen meldet sich selbsttätig in
der Lokliste an.
• Wagen abmelden:
1. Wagen vom Gleis entfernen.
2. Lokeintrag löschen.
Eine Adressänderung ist nicht notwendig.
Parameter mit der Mobile Station verändern
1. Wagen aus der Lokliste auswählen.
2. Zum Untermenü „LOKÄNDERN" wechseln.
3. Zum Untermenü „VOL" oder „RESET" wechseln.
4. Neuen Wert eingeben und übernehmen.
Beachten Sie die Hinweise in der Anleitung zur Mobile
Station / Central Station.
Operation with the Mobile Station / Central Station
• Set the car on the track. The car automatically registers itself
in the locomotive list.
• Taking the car out of the locomotive list:
1. Remove the cars from the track.
2. Delete the locomotive entry.
It is not necessary to change the address.
Changing Locomotive Parameters with the Mobile
Station
1. Select the car from the locomotive list.
2. Change to the submenu "EDIT LOC".
3. Change to the submenu "VOL" or "RESET".
4. Enter the new value and accept it into the system.
Please note the information in the instructions for the Mobile
Station / Central Station.
Exploitation avec Mobile Station / Central Station
• Enrailler la voiture. La voiture signale automatiquement
sa présence dans la liste des locos.
• Appeler voiture:
1. Enlever voitures de la voie.
2. Effacer entrée loco.
Une modification de l'adresse n'est pas nécessaire.
Modification des paramètres avec la Mobile Station
1. Sélectionnez la voiture dans la liste.
2. Allez au sous-menu „MODIF LOC".
3. Allez au sous-menu „VOL" ou „RESET".
4. Entrez la nouvelle valeur et acceptez.
Respectez les remarques mentionnées dans l'instruction
accompagnant la Mobile Station / Central Station.
Bedrijf met Mobile Station / Central Station
• Wagen op de rails plaatsen. De wagen meldt zichzelf
aan in de loclijst.
• Wagen afmelden:
1. Wagen van de rails nemen
2. loc invoer wissen.
Het wijzigen van het adres is niet nodig.
Parameter wijzigen met het Mobile Station
1. Wagen uit de loclijst kiezen.
2. Ga naar het nevenmenu "WYZIG LOC".
3. Ga naar het nevenmenu "VOL" of „RESET".
4. Nieuwe waarde invoeren en overnemen.
Lees ook de opmerkingen in de gebruiksaanwijzing van
het Mobile Station / Central Station.
17

Werbung

loading