3 Operating
1. Turn o the massager before replacing another massage head.
2. Your massager comes equipped with 4 attachments (Figure 1). Attach the di erent heads by
twisting clockwise (Figure 2), detach the installed massage head by twisting anti-clockwise and
pulling out (Figure 3). Always turn o the device while replacing the heads.
Fig.2
3. Turn on the massager by operating the control buttons (insturctions as below)
4. Apply the massager head lightly to the area you wish to treat. Move the unit slowly, holding it over
the targeted area. Treat the area for a short period of time and move to another area. NEVER treat
the same area for longer than 3 minutes.
5. To turn the unit o by pressing the power button. For your safety the device will automatically turn
o after 15 minutes of continuous use.
Intensity Button
Press to choose High,
Medium,Low
intensity of vibration
Heat Button
Press to turn the Heat
function on or o
Fig.3
Mode Button
Press to change Mode
between M1 to M3
Power Button
Press to turn the massager on/o
NOTE: When Power
button indicator turns
green and blink, that
means the battery is low,
please charge in time.
It is safe to use the
massager while charging.
18