Vision PICCOLA PRO Gebrauchsanweisung Seite 14

GB
1 OPENING THE STRUCTURE OF THE PUSHCHAIR
A. Unlock the safety catch by pulling the two catches upwards.
B. Pull the handlebar upwards to unfold your Vision and make sure you hear the double click.
C. Press the two side buttons on the handlebar and adjust it to the required height.
WARNING: It is important to keep the child at a safe distance from the pushchair when fold-
ing and unfolding it. During these operations it is inevitable that there are sharp parts and
parts that can trap fingers.
2
FITTING AND REMOVING THE FRONT WHEELS
A. Insert the front wheel spike into the plastic base until you hear it click.
B. Press with a flat screwdriver or a coin and pull the wheel.
3
FITTING AND REMOVING THE REAR WHEELS
A. Line the toothed hole up with the axle and press until you hear it click.
B. To remove: Press the button under the support bar and pull the wheel.
4
USING THE PARKING BRAKE
A. PUTTING THE BRAKE ON: Push the lever downwards.
B. TAKING THE BRAKE OFF: Pull the lever upwards.
5
LOCKING THE FRONT WHEELS
A. Push the button down to fasten the wheels forwards.
B. Push the fastening lever upwards to unlock the wheels.
C. Wheel position in the folding position.
6
FITTING AND REMOVING THE REVERSIBLE SEAT
The seat can be fitted facing you or facing forwards, as it is reversible.
A. To fit the VISION seat to the pushchair, tilt the seat forwards slightly.
B. Slot the two U-shaped openings simultaneously onto the two circular pegs on the push-
chair.
C. Once the two fasteners are secure, let the back part of the seat drop down until the
two rear fasteners are secure and you hear the double click. Pull the seat to check that it is
securely fastened.
D. To unfasten the seat, simultaneously pull the two rear unlocking levers backwards and
pull the seat upwards.
7
PRO-FIX SYSTEM
The chassis of your pushchair includes the PRO-FIX system, ready to fit the following car
safety elements: Capazo pro, Duplo pro and Piccola pro. The PRO-FIX system makes it easy
to fit and detach these accessories on and off the chassis, quickly, simply and safely locking
them securely onto the chassis. To do this, carefully follow the instructions for these acces-
sories. To access the PRO-FIX system zone, lift the two covers fitted on the armrest.
WARNING: It is essential to remove the seat from the pushchair to be able to fit any of the
car accessories.
8
TO ADJUST FOOT REST
Press down both round buttons to adjust foot rest.
14