Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instruction; Product Description; Mounting The Device - Peiying PY-DVR031 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety instruction

Read this instruction manual and keep it for future reference. Producer
does not take responsibility for damages caused by inappropriate
handling and use of the product.
• Protect this device from humidity, water and other liquid. Avoid using/
storing it in extreme temperatures. Do not expose it to direct sunlight
and other sources of heat.
• This appliance may be used by children who are above 8 years old and
by persons with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, if they are supervised and guided
by a person who is responsible for their safety in a cautious manner
for all the safety precautions being understood and followed. Children
should be supervised to ensure that they do not play with the
appliance. Children should not perform cleaning and servicing of the
device unsupervised.
• Keep the device out of the reach of children.
• Do not expose this device to direct sunlight for a long time.
• If the device was not used for a long time, charge it for at least 10
minutes before use.
• Use only authorized accessories.
• Always disconnect the product from the power source before cleaning.
• Clean this device with a soft, slightly damp cloth. Do not use any
chemical agents to clean this device.
• Do not attempt to repair this device yourself. In case of damage,
contact authorized service point for check-up or repair.
• Turn off the device before ejecting SD card. Otherwise, data on the SD
card may be damaged or removed.

Product description

1. Mini USB socket
2. AV socket
EN
3. microSD card slot
4. Hooks
5. Display
6. M button
7. Up button
8. Power button
9. Down button
10. OK button
11. Speaker
12. Camera
13. Reset button
10
Owner's manual
Owner's manual
1
2 3
4
4
M
OK
6 7 8 9 10

Mounting the device

Dashcam:
1. The device has to be installed on cars rear view mirror.
2. Place the device in a way that the camera is next to the cars original
rear view mirror.
3. To secure the device in place, put provided rubber restraints on the
hooks.
4. Plug one end of the car charger into the mini USB socket in the
dashcam, plug another end into the vehicle's cigarette lighter socket.
5. Adjust the mirror according to drivers position. Point of view of the
camera can be adjusted by moving the camera in its socket.
Note: Place the cable in a way, that it does not disturb the driver while
driving.
4
5
4
1 1
13
12
EN
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis