Inserting/Replacing The Battery - VOLTCRAFT VC2030A Bedienungsanleitung

7. INSERTING/REPLACING THE BATTERY

1. Switch off the meter before starting battery replacement.
2. Open the rear screw of the battery compartment with a small Phillips-head screwdriver.
3. Carefully remove lid of the battery compartment "12".
4. If required, remove flat batteries from the housing and insert two new batteries of the
same type (see technical data) into the battery compartment with the correct polarity.
5. Carefully replace the battery compartment lid on the meter and fasten it again with the
screw.
28