Herunterladen Diese Seite drucken

Connection To A Hi-Fi System - Conrad VR-S988U Bedienungsanleitung

Digital voice recorder

Werbung

• Press "MENU/ HOLD" three times. The dis-
play indicates "BEEP ON" (or "BEEP OF").
• Press "
" or "
" to change over
between the two settings.
• Press " II" or
"STOP/ DEL" to confirm the setting.
• The previous function (e.g. recording) will be
continued with the new setting.
d) Recording Mode (SP/ LP, short-play/ long-play)
The Digital Voice Recorder disposes of two different recording
modes:
• SP, short-play/ normal play: recording time approx. 8h 51min
• LP, long-play:
However, the prolonged recording time is due to a lower audio qual-
ity. If you do not need the prolonged recording time of the "LP"
mode, you should prefer the "SP" mode.
The basic setting is "SP".
• The setting can be changed both in stop mode and during play-
back (not during recording!).
80
recording time approx. 16h 28min
12. Dubbing
a) Connection to a Hi-Fi System
Digital Voice Recorder
audio cable
line input (e.g. "Aux- In" etc.)
Hi-Fi system
Connect the headphones output of the Digital Voice Recorder with a
line input e.g. of your hi-fi system. Then, record the desired single
recordings, e.g. by means of a tape deck, MD recorder, etc.
b) Connection to a PC Sound Card
Connect the headphones output of the Digital Voice Recorder with a
line input of your PC sound card.
Please observe the operating manual of the soundcard or the PC to
know how to record audio files and to store them on hard disk.
c) Connection to the USB Port of a PC
see topic 13.
85

Werbung

Kapitel

loading

Diese Anleitung auch für:

77 35 25