Werbung
You can do this regardless whether the Digital Voice Recorder is
playing a single recording or it is in "STOP" mode.
e) Repeat Mode
Repeat a Section
• Briefly press "FILE/ REPEAT" during play-
back. The starting point for the section that is
to be played is set. On the display "REP A B"
starts flashing.
• If the desired end point is reached, briefly
press again "FILE/ REPEAT". The end point
is set and "REP A B" stops flashing.
• The selected section will be repeated ten
times.
• Briefly press "STOP/ DEL" to stop playback.
Repeat a Single Recording
• Press "FILE/ REPEAT" longer during playback.
The display indicates "REP". Release the key.
• The currently playing single recording will be
repeated ten times.
• Briefly press "STOP/ DEL" to stop playback.
76
• Connect the Digital Voice Recorder with a free USB port of your
PC via the enclosed specific USB cable.
If you connect the cable to a USB hub, please make sure that it is
a USB hub with own power supply (" Self Powered Hub").
Make sure to connect the small specific
USB plug correctly. The side of the plug
marked with an arrow has to be direct-
ed towards the back of the Digital Voice
Recorders.
• Switch the Digital Voice Recorder on.
• Windows detects the device automatically. Follow all instructions.
Depending on the Windows version you are using (98/98SE, ME
etc.), the installation boxes will look slightly different.
Click on „Next"
89
Werbung
Kapitel
