Herunterladen Diese Seite drucken

Eurotops 25412 Bedienungsanleitung

Solar-vogelvertreiber
Verfügbare Sprachen

Verfügbare Sprachen

C 1912 / GH-192C
Sound & Flashlight Solar bird repeller
Installation:
1. Unlatch battery door on back of unit and remove battery compartment.
Install 4 x AA alkaline batteries.
2. Two installation:
- Put 2 screws on the wall .To place unit onto wall, push double wall mount hanging holes onto the screws. For best
detection; the unit should be positioned on the wall between 4.8 -14.2 feet above the ground.
- Insert the spike into the earth, be careful not to use excessive force lest the device be damaged, or bump into any
obstruction.
How does it work:
Day Mold: Select the Day Mold, the unit working at the sound function only in day time. sound and flash light will
working same time in night time.
Night Mold: Select the Night Mold, the unit will work in sound function only in day time and flash light will working
only in night time.
Note: If you are worried to make a noise to disturb people at night time, we suggest you select the Night Mode. FIGURE 4
Attention: There have different sound for user choice that is bird, eagle sound, dog bark sound;
Most important, user can adjust the volume.
FIGURE 1
Specification:
1. Unit dimension:
2. Unit Weight:
3. Power Supply
4. Power Consumption:
5. Coverage:
8.5CM x 12.7CM x 45CM
0.38kg
4xAA alkaline rechargeable batteries
Standby current: 0.2 mA
Working current: 210 mA
8-10 meters, 110°
FIGURE 2
loading

Inhaltszusammenfassung für Eurotops 25412

  • Seite 5 C 1912 / GH-192C Solar-Vogelvertreiber Installation: 1. Den Deckel des Batteriefachs auf der Rückseite abnehmen . 4 Alkaline Batterien AA einlegen. 2. 2 Installationsmöglichkeiten: - Wandaufhängung: 2 Schrauben an der Wand anbringen und das Gerät mithilfe der Löcher auf der Rückseite des Geräts daran aufhängen.
  • Seite 6: Technische Daten

    C 1912 / GH-192C Technische Daten: 1. Abmessung: 8.5 cm x 12,7 cm x 45 cm 2. Gewicht: 0,38 kg 3. Versorgung: 4 aufladabre AA Alkaline Batterien 4. Verbrauch: Stand-by-Modus: 0,2 mA Betrieb: 210 mA 5. Wirkungsbereich: 8-10 Meter, 110 ° Vorsicht: ●...