Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Operating The Appliance - Siemens DO10702M Montageanleitung

Inhaltsverzeichnis

Werbung

Technical data

Type
Rated output
Rated capacity
Mixed water quantities 40 °C (15 °C/85 °C) / (15 °C/85 °C)
Variable temperature adjustment up to
Stand-by power consumption at 65 °C/24 h
Electrical connection
Heat-up time to 60 °C (supply temperature 12 °C)
Fuse protection
Water connection
Maximum flow
Cable length
Dimensions (Height x Width x Depth)
Weight, filled
Energy efficiency class
Load profile
Annual energy consumption
Daily energy consumption
Sound power level
Hot water heating energy efficiency
Usage (for the customer)
Before using the appliance, please read the instruc-
tions carefully and observe them!
Important: The appliance may never be exposed to frost!
Risk of electric shock!
If a fault occurs, immediately disconnect the plug
from the power supply!
Immediately shut off the cold water supply to the
appliance should it leak.
Please read and observe the detailed safety instructions
at the start of these instructions!

Operating the appliance

The small water heater heats and stores drinking water up to
approx. 85 °C.
The warm water outlet of the small water heater
serves for pressure equalisation and my be con nected
only to the pressureless batteries BZ 13051 or BZ 13061
(below basin) or BZ 11113 (above basin).
en
DO10702M
DO10702CHM
[kW]
2.2
[l]
10.0
[l]
19/28
[°C]
85
[kWh/d]
0.3
[V]
220 – 240
[min]
16
[A]
10
[mm (")]
17.2 (G 3/8 A)
[l/min]
10
[m]
0.7
[mm]
460 x 295 x 285
[kg]
13.7
A
XXS
[kWh]
486
[kWh]
2.360
[dB]
15
[%]
36.5
Setting the water temperature
The outlet temperature can be limited to approx. 40 °C
(Position "I") or approx. 60 °C (Position "e").
The rotary selector switch also switches on the heating system.
Position:
Cold
Frost protection
I
Approx. 40 °C
e
Conserve energy approx. 60 °C (soft lock-in)
III Hot water approx. 85 °C
During heating, the pilot lamp lights and expansion water
drips from the outlet.
The appliance with be covered more quickly with limescale
at higher temperatures.
Tip: Set the rotary selector switch to "e" to operate the appli-
ance economically and to reduce the effects of limescale.
DO10802M
DO10802CHM
2.2
10.0
19/28
85
0.3
220 – 240
16
10
21.3 (G 1/2 A)
10
0.7
461 x 295 x 285
13.7
A
XXS
490
2.410
15
35.9
(soft lock-in)
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Do10702chmDo10802chmDo10802m

Inhaltsverzeichnis