Maintenance And Cleaning; Handling - Conrad 40MHz Bedienungsanleitung

10. Maintenance and cleaning

The product does not require any maintenance. You should never take it apart.
The product should only be repaired by a specialist or specialist workshop or it might be
damaged. Furthermore, the CE approval will become void as well as the guarantee/warranty.
Clean the product with a soft, dry and lint-free cloth. Do not use cleaning agents; they can be
aggressive on the plastic housing and the labelling.
Dust can be removed using a clean, soft brush and a vaccum cleaner.

11. Handling

Observe all safety instructions in this manual!
The product is not a toy and should be kept out of the reach of children. Children do not
understand how dangerous electrical devices can be.
The following unfavorable conditions at the installation site, during operation or transport are
to be avoided :
- Excessive humidity or dampness
- Extreme cold (<-10°C) or heat (>50°C), direct sunlight,
- Dust or combustible gases, vapours or solvents
- Strong vibrations, impacts or blows,
- strong magnetic fields such as those found in the vicinity of machinery or loudspeakers
The product must only be used in dry interior rooms, it must not get damp or wet.
Otherwise there is the risk of a fatal electric shock!
Never use the product immediately after it has been brought from a cold into a warm room.
Condensation that forms might destroy your device.
30