Pixsys ATR244 Installationsanleitung Seite 71

GROUP W -
timr
328 tmr. 1 Timer 1
Enabling Timer 1
Disabled (Default)
diSab.
Enabled
Enab.
Enabled and active at start
En.StA.
329 t.b.t. 1 Time Base Timer 1
Selects time base for timer 1
minutes.seconds (Default)
mm.SS
hours.minutes
hh.MM
330 a.tm. 1 Action Timer 1
Select the type of the action executed by the timer 1 to be related to an alarm..
Start. Active during timer counting (Default)
Start
End. Active at timer expiry
End
Warning. Active 5" before the timer expiry
WArn.
331 tmr.2 Timer 2
Enabling Timer 2
Disabled (Default)
diSab.
Enabled
Enab.
Enabled and active at start
En.StA.
332 t.b.t.2 Time Base Timer 2
Selects time base for timer 2
minutes.seconds (Default)
mm.SS
hours.minutes
hh.MM
333 a.tm.2 Action Timer 2
Select the type of the action executed by the timer 2 to be related to an alarm.
Start. Active during timer counting (Default)
Start
End. Active at timer expiry.
End
Warning. Active 5" before the timer expiry.
WArn.
334 tMr.s. Timers Sequence
Select the correlation between the two timers.
Singles. Timers work independently (Default)
SinGL.
Sequential. When timer 1 ends, timer 2 starts.
SeQue.
Loop. When a timer ends, another starts.
LooP
335÷339 Reserved Parameters - Group W
Reserved parameters - Group W
- Timer
User manual - ATR244 - 71