Changing The Nozzle; Further Examples Of Uses In The House, Car And Garden; Cleaning; Service - Parkside PHLG 2000 B1 Bedienungs- Und Sicherheitshinweise

Operation / Cleaning / Service / Warranty

Changing the nozzle

Q
Too much heat causes paints
and plastics to ignite.
CAUTIoN! Do not inhale the resulting vapours.
Protector nozzle
4
and varnish (see Ill. B):
P lace the protector nozzle
outlet tube .
3
T he spatula shape of the nozzle ensures the air
is properly directed. Use a separate spatula for
removing paint or varnish.
Flat nozzle – for detaching glues,
5
softening paint (see Ill. C):
P lace the flat nozzle
D o not apply heat for too long a period, as
burnt paint becomes much more difficult to
remove. Many glues can be softened by warm-
ing. Glued connections can then be detached
and excess glue removed.
Reducing nozzle
6
P lace the reducer nozzle
outlet tube .
3
U se the reducing nozzle
sleeves and film.
Further examples of uses in
Q
the house, car and garden
Defrosting water pipes:
Notice! It must not be used for thawing PVC pipes.
Notice! It is often very difficult to tell the difference
between gas pipes and water pipes. If in doubt,
ask a competent person.
Notice! Copper pipes are joined using tin solder
and must not be heated above 200 °C.
Loosening a threaded connection:
H eating the threaded connection carefully can
often allow the connection to be released.
34 GB
– for removing paint
on the
4
on the outlet tube
5
– for welding plastic:
on the
6
for heat-shrinkable
6
Removing weeds:
T he heat dries out the weeds and micro-
organisms.
Lighting barbecue charcoal (see Ill. E):
P ush the barbecue lighting nozzle
hot air nozzle
C harcoal ignites in a few minutes.
Wax removal:
Y ou can remove wax residues from skis / snow-
board or from candle holders. Use the amount
of care appropriate to the product.

Cleaning

Q
.
3
appliance, always remove the plug from the power
socket.
K eep the air inlet and outlet clean.
U se a cloth to clean the housing. Use a soft
cloth to clean the housing. Never use petrol,
solvents or cleaning agents as these may
attack the plastic.

Service

Q
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
lead needs to be replaced, always
have the replacement carried out by
the manufacturer or its service centre.
This will ensure that your device remains safe
to use.
Warranty
Q
The warranty for this appliance is for 3
years from the date of purchase. The ap­
Do not use methylated alcohol.
on to the
7
.
3
Before carrying out work on the
Have your device
If the plug or mains