Safety Guidelines - Parkside PLEM 50 A1 Bedienungsanleitung

B) In unfavourable conditions such as strong sunlight or poorly
refl ective surfaces, the maximum deviation is ± 10 mm at 50 m. In
favourable conditions, a deviation infl uence of ± 0.05 mm/m must
be taken into account.

Safety guidelines

■ Do not use the device in locations where there is a risk of fi re or
explosion, e.g. in the vicinity of infl ammable liquids or gases.
■ This device may be used by children of the age of 8 years or
more and by persons with reduced physical, sensory or mental
capabilities or lack of experience and/or knowledge if they are
being supervised or have been instructed with regard to the safe
use of the device and have understood the potential risks. Children
must not use the device as a plaything. Cleaning and user mainte-
nance should not be performed by children unless they are under
supervision.
■ Do not leave the device unattended when switched on, and
switch off the device directly after use. Other people could be
blinded by the laser beam.
■ Protect the device from wetness or direct sunlight.
■ Do not expose the device to any extremes of temperature or
temperature fl uctuations. For example, do not leave it in a car for
extended periods. After exposure to large temperature fl uctuations,
allow the device to acclimatise before using it again. The precision
of the device can be adversely aff ected by extreme temperatures
or temperature fl uctuations.
■ Avoid hefty knocks or dropping the measuring tool.
PLEM 50 A1
GB
IE
5