Subtraction (Minus); Measured Value Memory/Calling Up A Saved Measurement; Saving A Measurement - Parkside PLEM 50 A1 Bedienungsanleitung

Subtraction (Minus)

GB
IE
The subtraction of measurements is carried out in the same way as
the addition.
♦
Press the
The
shows "− - - - - - - " and subtracts the individual values of the
measurement from each other. The result can also be a nega-
tive number.
Measured value memory/Calling up a saved
measurement
All measured and calculated values can be stored in the memory.
The values are saved with their unit (length, area or volume). Calcu-
lated values are stored together with the respective individual values.
There are a total of 50 memory locations available. As soon as
all 50 memory locations are occupied, the oldest measurement is
deleted. The new measurement result is then stored on location 50.

Saving a measurement

The last 50 measurement results are automatically stored in the
memory.
Calling up measurement values from the cache
The cache allows quick access to a single memory value. If a value
is used multiple times, the cache is the ideal solution.
♦ Press the
the cache. The
the number of the memory location.
♦ By pressing the
the memory locations 1 to 50. The
memory location.
16
button to start the subtraction.
reading now appears on the display
or
icon appears on the display
or
buttons to display the values stored in
buttons you can navigate through
icon shows the active
, the reading
along with
PLEM 50 A1