•
Introduction to operation keys
Operationwithout special specification refers to short press on keys.
Each key takes the following functions according to the F mesure settings.
Key symbol
Weight unit
Counting scale unit
Weight % indicator
Normal weighing state
Weight maintenance key
Short press → F2.1 = 1, keep/cancel.
F2.1 = 2, switch between percentage and weight.
F2.1 = 5, switch between quantity and weight.
Long key → enter setting menu.
Accumulation key
Short key → F2.1 = 4, include display weight in accu-
mulation value.
Long key →
F2.1 = 3, select scale to sample target
weight.
F2.1 = 4, accumulate weight of scale display.
F2.1 = 5, count sampling of scale.
Unit conversion key
Short key → in weighing state, switch weight unit. The
corresponding unit indication lamp is on.
Gross key
Short key → net weight turns to gross weight; induction
lamp of net weight "Net" is off.
Tare key
Short key → gross weight turns to net weight. Indication
lamp of net weight "Net" is on. Conduct skin removal
operation for multiple times.
Clearing key
Gross weight state resets weight. When the scale is in
net weight, dynamic state, saving state and out of reset-
ting range, clearing operation is invalid
ON/OFF key
Short key → start up or print. (only for printer models)
Printing format refers to Appendix1.
Long key → shut down. Turn on/off
USER'S MANUAL ARX
Set state
Return to the last menu.
No definition.
Flicker bit is on the left.
Flicker bit is on the right.
Digit flicker position reduces.
In setting, digit of flicker posi-
tion increases. In adjustment
of display, accumulation is
cleared.
Confirm operation, to save
setting data.
EN
EN
11