Mounting The Stand; Service Informationen - DNT DIGIMICRO MOBILE Bedienungsanleitung

digital zoom of the DigiMicro Mobile is set to 2x-4x. In direct contact of the illuminated point of
the microscope you will get a magnification of about 500-700x if the image is shown in fullscreen
on a 17" monitor.
To get a fullscreen 100%(1:1) on the monitor please use a freeware program like XnView (xnView.
de) or Irfanview ( irfanview.de).

Mounting the stand

Put the stand end with screw toward the mount hole on the microscope properly and rotate
the end into the hold carefully. Do not force the end into the hole; forcing may damage the
microscope.
Adjust the height of the stand at a proper position.
Service information
In case of complaints your device shows a defect, please consult your dealer or contact the
service department of dnt to agree a servicing.
Service time: Monday until Thursday from 8.00-17.00h
Friday from 8.00-16.00h
Hotline/service: +49 6074 3714 31
E-mail: support@dnt.de
Please do not send your device to our address without request by our service team. The
expense and the risk of the loss are for debits of the sender. We reserve to refuse the unre-
quested shipment or return corresponding goods to the sender at buyer's risk and expense.
- 50 -