Disposal; Troubleshooting - Renkforce 1386535 Bedienungsanleitung

9. Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste!
Dispose of the product according to the applicable statutory provisions at the end of its service
life.

10. Troubleshooting

By purchasing this fog machine, you have acquired a state-of-the-art product which operates reliably.
Nevertheless, problems or malfunctions may occur.
We would therefore like to describe how you can eliminate possible malfunctions:
Please observe the safety instructions!
Fog production suddenly stops during operation:
• The device is re-heating. Once the heating process is complete, the device produces fog again.
• The device is no longer connected to the power supply. Make sure that the device is properly connected
to the mains voltage. If necessary, check the mains socket.
• The tank is empty and needs refilling.
The device continues to produce fog for a short period of time after it has been switched off/unplugged:
• This is not a defect. The remaining fog liquid in the fog outlet is evaporating.
Repairs other than those described above should only be carried out by an authorised specia-
list.
24